Truckpave porous pavers

Truckpave porous pavers

Truckpave heavy load-bearing porous pavers

Application Function

Ground Stabilisation

TERRAM TRUCKPAVE cellular paving is manufactured from recycled plastics providing a robust, lightweight, durable economic and eco-friendly alternative to concrete grasscrete-type pavers, capable of withstanding all levels of traffic up to and including coaches, dustcarts and HGVs.

TRUCKPAVE’s cells can be filled with either grass seed/topsoil or gravel, making them suitable for stabilising areas where a grass or stone surface is desirable.

TRUCKPAVE applications include:

• Lorry, coach and car parks
• Emergency fire access roads
• HGV service access roads
• Road widening
• Grass verges, including where HGV overrun occurs
• Footpaths
• Service yards and other areas where forklift trucks operate 
• Lay bys
• Loading areas


• TRUCKPAVE 80 has tongue and groove interlocking for additional stability
• Meet SLW60 load category - vehicles up to 60t gross weight
• Flexible and resistant to cracking unlike concrete alternatives
• Because of its insulating qualities, plastic achieves greatly improved volume and quality of grass compared to concrete units
• High compressive strength
• TRUCKPAVE 100 is available with anti-skid surface detail for additional traction on gradients
• Pavers do not transfer heat and dry out soil infill
• Harmless to plants and animals
• Environmentally friendly - manufactured from recycled plastics
• Non-standard colours can be manufactured subject to order quantity


TRUCKPAVE pavers should be installed onto a well-prepared, free-draining, firm and relatively-level stone sub-base (a reduced-fines Type 3 for example).  As an option a Tensar Triax TX160 geogrid at the base of this layer will allow a reduction in the sub-base depth.  The sub-base is overlaid with BGT100 geotextile filter/separator followed by 20mm of coarse sand as a bedding layer for the pavers.

Once laid, the paver cells can be filled with a free-draining stone (e.g. 10mm gravel) or a good, clean, friable top soil and grass seed at 30/40 g/m2.  The cells should not be overfilled so remove excess topsoil or stone from the surface.  The topsoil settlement that will occur within the paver cells is desirable as this will allow grass growth without direct impact from traffic.

Perimeter pavers should be restrained using pinned timber sleepers or precast kerbs.  The pavers can be cut with a hand saw or power cutter for fitting around obstructions.

The whole area should be compacted with either a plate vibrator or a small roller.

For large TRUCKPAVE installations with full edge restraint to all sides, it may be advisable to allow for expansion due to fluctuations in temperature.  Please contact our technical sales team for advice on this or any other issues relating to design and installation of the pavers.

Product Specification :

ProductDimensions (mm)
(w x l x d)
Weight (kg)Units/m2Units/palletColourPart No.
Truckpave 80600 X 400 X 8094.1780 No (19.18/m2)Grey143412
Truckpave 80 with anti-skid surface600 X 400 X 8094.1780 No (19.18/m2)Grey143634
Truckpave 100*600 X 400 X 100124.1760 No (14.39/m2)Grey142880
Truckpave 100* with anti-skid surface600 X 400 X 100124.1760 No (14.39/m2)Grey143450

*Truckpave 100 was previously marketed in the UK and Ireland by Hoofmark (UK) Ltd (in liquidation as of May 2012). This paver will continue to be available from Fiberweb Geosynthetics for clients who prefer the additional depth of the unit for their particular application or wish to extend previously-installed areas


TERRAM Highways & Roads
TERRAM Product Brochure
TERRAM Grass Reinforcement Solutions
TRUCKPAVE porous pavers
TRUCKPAVE - Gravel Surfaces
TRUCKPAVE - Grassed Surfaces
TRUCKPAVE Porous Pavers for heavy vehicle access