BodPave 85 Plastic porous pavers

BodPave 85 Plastic porous pavers

BodPave 85 porous paving grids

Application Function

Ground Stabilisation

 

TERRAM BODPAVE 85 porous paving provides a durable, safe and eco-friendly surface for trafficked areas.

TERRAM BODPAVE 85  cellular grass and gravel pavers / paving grids are a strong, interlocking, UV stable, 100% recycled plastic paving grid system for grass reinforcement, ground stabilisation & gravel retention for regular, pedestrian and vehicle trafficked surfaces. 

Manufactured in the UK from chemically inert and non-toxic HDPE, TERRAM BODPAVE 85  porous pavers can be installed with grass or gravel filled surface for applications including:

  • Car Parks / Coach Parks (Grass or Gravel)
  • Overspill / overflow grass car parks
  • Emergency Service (Fire Access routes)
  • HGV service access routes
  • Aircraft taxiways & helipads
  • Walkways and disabled access routes (DDA)
  • Golf buggy paths
  • Driveways and residential lawn parking
  • SUDS source control

TERRAM BODPAVE 85  is a cost effective solution to worn & rutted grassed areas, displaced gravel and for source control of surface water run-off.

Benefits

  • TERRAM BODPAVE 85  grass and ground pavers have a load bearing capacity up to 400t/m²
  • Supplied as 4 pavers (1sqm) pre-connected for rapid ease of installation
  • Manufactured from 100% recycled polymer
  • TERRAM BODPAVE 85  grass pavers / ground reinforcement pavers are British manufactured
  • Pavers filled with grass or gravel are SUDS source control compliant
  • TERRAM BODPAVE 85  grass pavers / gravel pavers allow a naturally pleasing, environmentally friendly & free draining grass or gravel surface
  • Paving grids can be offset by 1 cell increments to fit around obstacles, while retaining a stong connection to adjacent pavers

 

Features

The unique design of TERRAM BODPAVE 85  resists lateral movement, improves traction and allows expansion & contraction whilst promoting optimum grass growth, root protection and surface stabilisation. The open cell structure provides high surface water infiltration and is suitable for source control within a SUDS profile.

TERRAM BODPAVE 85  permeable paving grids should be installed onto a well prepared, free draining, firm and relatively level sub-base (typically a DoT (GSB Type or reduced fines Type 3) using either Boddingtons ‘reduced-dig system‘ or by employing a full sub-base construction incorporating a Tensar TriAx™ TX160 geogrid reinforcement layer. The ground reinforcement porous paving grids simply connect together and are filled with either a sand:soil rootzone and seeded for a grass surface, or filled with an angular aggregate for a gravel surface as determined by the application. Construction profiles for each application will be determined by specific site conditions & loading criteria. Detailed design literature and technical support are available to download on the left of this page. Please note that for all TERRAM BODPAVE 85  grass paver / gravel paver installations, we strongly recommend that all areas should have sufficient drainage prior to the installation. Failure to ensure this may result in the product not performing as intended.

Car Park Bay Marker

TERRAM manufacture an injection moulded car park bay marker that has been designed to snap-fit into the paving grids structure.


The marker is 215mmx70mm and can create a variety of shapes from lines, squares, L-Shapes, T-Shapes and many words.
Part No. 069675.

T-ShapedT-Shaped
L-ShapedL-Shaped
I-ShapedI-Shaped
 

Product Specification

Paver Size : 500mm x 500mm x 50mm (+35mm integral ground anchor spike)

ColorWeightLoad Bearing 
Capacity
MaterialPart No.
Black6.24kg/m²400 t/m²100% Recycled 
Polyethylene
057580
Green6.24kg/m²400 t/m²100% Recycled 
Polyethylene
059447
Natural White6.24kg/m²400 t/m²Virgin Polyethylene059430


Installation Guidelines

For full installation instructions and guidelines download our Specification, Design & Installation Guidance documents which can be accessed through the 'Technical Product Download' tab above on this page. These downloads are for :


TERRAM BODPAVE 85 Typical Design Profile for grass or gravel surfacesTERRAM BODPAVE 85 Typical Design Profile for grass or gravel surfaces


Grassed surfaces

Grass car parks, overflow grass car parks, grass paths, residential lawn parking, grass access routes with a full construction profile.

Gravel surfaces

Gravel driveways, grave car parks, gravel coach parks, access roads, caravan standings with a full construction profile

'Reduced Dig'

Where firm or reinforced ground already exists and where lighter applications may be required for both grass and gravel surfaces

TERRAM BODPAVE 85  Plastic paving grid structureTERRAM BODPAVE 85 Plastic paving grid structure


The typical design profile includes reference to a Tensar TriAx TX160 geogrid and a BGT100 Geotextile which are both available from TERRAM.

The information on this page is of an illustrative nature and is supplied without charge. It does not form part of any contract with the user. Final determination of the suitability of any information or material for the use contemplated and the manner of the use is the sole responsibility of the user and the user must assume all risk and liability in connection therewith.

Downloads

TERRAM Highways & Roads
TERRAM Product Brochure
TERRAM Grass Reinforcement Solutions
BODPAVE 85 porous pavers
BODPAVE 85 Reduced Dig SDI
BODPAVE 85 Gravel SDI
BODPAVE 85 Grassed SDI
BODPAVE 85 Running track (Cheshire)
BODPAVE 85 Gravel-filled paver access / cycle route (Blackpool)
BODPAVE 85 Gravel filled porous pavers for verge protection (Leigh On Sea)
CAD File Download PDF File Download
BODPAVE 85 Reduced Dig Gravel
CAD File Download PDF File Download
BODPAVE 85 Reduced Dig Grass
CAD File Download PDF File Download
BODPAVE 85 Gravel Surface
CAD File Download PDF File Download
BODPAVE 85 Grass Surface
BODPAVE 85